[Offer to Sell] Corrugated paper belt |
|||||||||||||||||
|
|
|||||||||||||||||
| Tensile strength: Warp direction (63-70) Mpa. in dry mode; Heat resistance: Raw materials are polyester synthetic fiber, softening point≥260℃ Moisture adsorption: Quick absorption and emission of heat, therefore cardboard can be quickly dried Air-permeability: Up to 2.08m3/m2 min, under 40mm water column pressure, through CCEP test Seams: Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat-resistance, fastness and non-marking Suitbalility: Suitable for all types of corrugators, various cardboards and some partcular operation mode Geometrical dimension: Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard Service life: As long as the same products imported abroad. Rubber Seam Feature: Belt seam part is fabricated with imported steel fasteners and filled with rubber Resists tearing, non-abscission Resists abrasion Resists heating: top up to 230℃ Flat surface. Neither damage flat press device nor damage outer rubber of driving-roller Smooth surface, non-marking, in favor of printing Stabilizes transmission, prevents heavy roller from jolting For a longer service life Ready-made for preprinting Suitable for various kinds of heavy-roller corrugators, especially for the new-type Corrugators with flat press device. |
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
| Home | Privacy
Statement | Terms
of Use | Advertising | Partners | Contact
Us | Help
© Copyright 2001-2026, b2b-board.com. All Rights Reserved.
|